Way wipers

for linear guideways

The machine sliding guides are in constant contact with shavings, dust and dirt.

It is indispensable to install the way wipers to avoid imbalances, breakdowns and therefore protect correctly the machinery.

To manufacture profiled way wipers it is indispensable to have exact drawings of the surface to be cleaned (measurements and angles of the guides). The work pressure is from 0.8 to 1 mm.

Scuder, has a wide range of way wipers to achieve

THE BEST PROTECTION FOR YOUR MACHINERY

AB serie way wipers

The most resistant way wipers serie. Manufactured in high quality polyurethane and stainless steel. Specially indicated for very tough working conditions, where there are large quantities of shaving and coolant.

  • With an airtight rear close to avoid the entry of oils.
  • Adapted and according to drawing.
 
 

Limpia Guías AB-5
AB-5

Limpia Guías AB-1
AB-1

Limpia Guías AB-3
AB-3

Limpia Guías ABH
ABH

NEWS
Scuder presents his new 88 shore polyurethane lip,blue colour with
special properties, used to manufacture way wipers with AB profiles.
This lip developed by Scuder with blue polyurethane, has a high resistance to abrasion, oils, lubricants and alkaline solutions.

Scuder way wipers AB Serie-Blue

 

Same characteristics as the AB serie, with stainless steel prescraper specially indicated for areas with a great quantity of hot shavings.

H W T
FAB-1 18 mm 4,6 mm 21 mm
FAB-3 25 mm 4,6 mm 21 mm
FAB-5 14 mm 4,6 mm 21 mm

FAB Way Wipers
FAB Way Wipers

The AB serie is manufactured with very high quality and resistant welds.

Manufactured with thermo-welded polyurethane union and mooring holes, upon request by the client.

Available in two finishes: polished stainless steel and satin stainless steel.

With the possibility to mix profiles of different heights so as to adapt to any type of guide.

We repair the entire AB way wipers serie, substituting the polyurethane lips and the deteriorated areas of the parts.

 

 

Sandwich way wiper, made up by laser cut stainless steel and a 2 mm. thick sheet of special polyurethane.
Resistant to abrasion, coolants, oils and high temperatures.
Pack assembled with countersunk screws.
Examples of sandwich way wipers.

 
 

Way wipers sheathed in stainless steel and NBR, good resistance and durability, easy to adapt, great resistance to abrasion, oils, coolants, etc. Continuous thermal resistance of 100º and maxmum thermal resistance of 135º. Adaptable without welding.

H S W T U Length
LMX 28 mm 21,5 mm 6 mm 10 mm 500 mm
LMX-F 28 mm 21,5 mm 6 mm 10 mm 25 mm 500 mm

 

 

Way wipers made up of an anodized aluminium profile and high quality blue colour polyurethane lip with a hardness of 85 shore.

Adjustable to the drawing by means of fasteners.

The LA way wipers serie has a variant with a special stainless steel pre-scarper for areas with a great quantity of hot shavings. (LA-F).

The aluminium profile and the polyurethane lip can be supplied separately.

Example of way wiper manufactured with LA profile with fasteners according to to the drawing. Example of way wiper manufactured with LA profile with fasteners according to to the drawing.

Way wipers serie LA
Way wipers serie LA

H

S

W

T

Length

LA 18×4,5

18 mm 14 mm 4,5 mm 7,5 mm 1000 mm

LA 25×4,5

25 mm 21 mm 4,5 mm 7,5 mm 1000 mm

LA 18×7

18 mm 14 mm 7 mm 10 mm 1000 mm

LA-25×7

25 mm 21 mm 7 mm 10 mm 1000 mm
 
limpia guias serie LA-F
limpia guias serie LA-F extrusionado

H

W

T

Length

LA-F 18×7

18 mm 10 mm 15 mm 1000 mm

LA-F 25×7

25 mm 10 mm 15 mm 1000 mm

 

 

Way wipers made up of anodized aluminum profile and double lip of NBR or vulcanized FPM.

Designed for sweeping in forward and back position with high resistance to wear, oils, cooling’s and shavings.

The FPM variant is recommended for high speed machines.

Profilable with internal union plates.

Supplied in strips of 1000mm.

Limpia Guías Lineales serie LAW-DL

Limpia Guías Lineales serie LAW-DL extrusionado
Limpia Guías Lineales serie LAW-DL 3D

Limpia guías – Rascadores para guías lineales